Bravo List

Bravo List (http://www.bvlist.com/index.php)
-   Project U-232 (http://www.bvlist.com/forumdisplay.php?f=80)
-   -   u-232-v4 No Data sended? (http://www.bvlist.com/showthread.php?t=10645)

lili 21st December 2015 20:21

u-232-v4 No Data sended?
 
Hi all

I administer a site running under ocelot for quite some time, but I want to migrate to your cms :)

1) everything is installed but I have an little problem, I have no network traffic my setup :
XBT_port: 2095
listen_port_default (in server.cpp): fixed to my cloudflare_port (2095)
Seed / Peer : visible OK //1Seeds/4Leech but no transfer !? (with and whithout VPN) :wallbash:

2) to the url announcement , I have added to the system and that http://mydomain.com and "https/mtdomain.com" for url https in SSL , which is the right size , with or without the " announce.php " ?

3) ocelot and in my config file to a place I have added the ip of my server? is it the same in your configuration, if so, to what place I place the server IP ? [EDIT]===> listen_ipa * in xbt/Tracker/xbt_conf* i think, ok i try
and when i download an torrent, the url_announce isn't on the port: 2095 but 2710??

//I think that i must to install xbt and after make install (cms,import,delete_install) ! no ?

4) How do I transfer torrent gazelle to this u -232 ? have you any advice? Thank you in advance for your reply and help.

ps: my iptables are OK :)

Best regards

DND 21st December 2015 21:46

hey
 
hmm..
you need to change a lot site/xbt.. then compile xbt with the new settings.
port is 2710, but again if you want to change that need to save settings in xbt and re-compile.

lili 21st December 2015 23:24

hey
 
thx! but xbt is compiled and re-compiled with my params and i don't understand my problem !? if in my client torrent i change 2095 by 2710 doesn't work, also, where is my problem, if i download an torrent, the announce is on 2710. I'll try an new compilation...why not ^^ question: config.cpp must be modified? Thx :)

DND 22nd December 2015 00:44

need also to edit the site's config.. doh! by default it has 2710 port for announce.:coffee:

ArcticWolf 22nd December 2015 00:44

xbt will not work in https without major rework of it..
besure you read the readme @ https://github.com/Bigjoos/U-232-V4
you have to use an only 1 revision and the correct files that are included with u232 v4 source.
Enter the following commands in a terminal. Be patient while g++ is running, it'll take a few minutes.
Code:

svn co -r 2466 http://xbt.googlecode.com/svn/trunk/xbt/misc xbt/misc
svn co -r 2466 http://xbt.googlecode.com/svn/trunk/xbt/Tracker xbt/Tracker
cd xbt/Tracker

Replace server.h and server.cpp and add xbt_tracker.conf from the U-232 V4 XBT folder then run ./make.sh
remember to add your mysql connect details to xbt_tracker.conf
I never tried changing the port but DND is right its 2710 i would try that port 1st after you change it in cloudflare, iptables then once works worry about changing it to something else..

announce.php is only used for php tracker ONLY

xbt announce url is http://mydomain.com:2710/announce
once you get xbt setup right you should just goto http://mydomain.com/install
and install it :)
but again the readme said that if anyone bothered to read anything anytime lol

You prob would get more u232 direct help via visiting its forum http://forum-u-232.servebeer.com/index.php but again takes reading too..

lili 22nd December 2015 00:53

Quote:

Originally Posted by DND (Post 48066)
need also to edit the site's config.. doh! by default it has 2710 port for announce.:coffee:

Yes, where/what is the file.php please ? @ArcticWolf: yes, i RTFM, thank you!

DND 22nd December 2015 01:31

if you did a good install you should have in the include folder config.xbt.
check that out

lili 22nd December 2015 11:08

Thanks for support, i'll check it after my work :) (to night)

Thx.

TraceR 22nd December 2015 12:20

its waste of time you cant send traffic via cloudflare for xbt even after changing port , cloudflare webapplication firewall blocks, just disable and seee it will work

DND 22nd December 2015 12:49

it can work if you set cloudflare properly.


All times are GMT +2. The time now is 07:25.

Powered by vBulletin® Version 3.8.11 Beta 3
Copyright ©2000 - 2024, vBulletin Solutions Inc.